Treadmill maintenance

What should I do if the treadmill is too noisy at home? How can I reduce the squeak from my running belt?

What to do if your treadmill is too noisy in your home? How to get rid of the squeak from your running belt when running on a treadmill, we mentioned that your treadmill may need lubrication. Clean the treadmill before refueling, pay attention to the debris and dirty oil between the treadmill and the running belt, and then fold the treadmill. Do not inject too much oil, so as not to slip between the treadmill and the running belt, which will affect the normal use of the machine.

What if the treadmill in the article is too noisy at home?

When running on a treadmill, how to get rid of the squeak from the running belt, we mentioned that the treadmill may need lubrication. Where do you oil your treadmill?

 Lubricate the treadmill

1. Preparation

Clean the treadmill before refueling, pay attention to the debris and dirty oil between the treadmill and the running belt, and then fold the treadmill.

2. Lift the left travel belt and pour oil on the travel plate along the travel direction. The controlled dose is 10ml;

3. Lift up the right traveling belt, and inject lubricating oil on the traveling plate along the traveling direction. The controlled does is 10ml;

4. Electric running at a speed of 3 kilometers per hour. The person stands up and, as the running board moves, gently presses on the lubricated area under the running board to spread it evenly over the running board. Warm reminder: Please hold on to the handrail when running, and pay attention to safety.

2. How often should the treadmill be repaired and refueled?

Use it for more than one hour a day

If the treadmill is used very frequently, it is recommended that everyone use lubricant once a month.

Use 4 to 7 hours per week

The workload of the treadmill is not very heavy, it is best to use oil every two months.

Use less than 3 hours per week

In this case, the frequency of the treadmill is relatively low, and it is recommended to use the oil every six months.

Refuel 20ml every 100 kilometers, and then run slowly on the treadmill for 10 seconds.

If the treadmill purchased has a self-refueling system, the refueling step can be done by filling the tank with oil.

3. What kind of oil should be used for treadmill maintenance?

Silicone oil

Antistatic lubricants for treadmills should never be replaced with motor oil or automotive lubricants. The two oils are very different.

Do not inject too much engine oil, so as not to slip between the treadmill and the running belt, which will affect the normal use of the machine.

Treadmills are usually topped up with antistatic lubricant before they leave the factory. Users can carefully consult the manufacturer before deciding whether to refuel immediately.

4. Time to refuel on the treadmill

To check if the treadmill needs refueling, grab the running belt and place your hands as close to the center of the back of the belt as possible.

If the running belt is covered with silicone, it means that the treadmill does not need to be refueled.

If the board is dry and there is no silicone in it, the treadmill needs to be refueled.

The price of the treadmill itself is not low, so it is best for users to continue to use it regularly after purchase, and not leave it for a long time to avoid dust absorption and rust.

Written by: JOYEN
The Exporter and Manufacturer of Fitness Equipment since 2003
Welcome OEM ODM
www.treadmillspinbike.com